- Open Access
Stability profiling of anti-malarial drug piperaquine phosphate and impurities by HPLC-UV, TOF-MS, ESI-MS and NMR
© Yan et al.; licensee BioMed Central Ltd. 2014
Received: 30 July 2014
Accepted: 27 September 2014
Published: 13 October 2014
Piperaquine, 1,3-bis-[4-(7-chloroquinolyl-4)-piperazinyl-1]-propane, is an anti-malarial compound belonging to the 4-aminoquinolines, which has received renewed interest in treatment of drug resistant falciparum malaria in artemisinin-based combination therapy with dihydroartemisinin. The impurity profile of this drug product is paid an ever-increasing attention. However, there were few published studies of the complete characterization of related products or impurities in piperaquine phosphate bulk and forced degradation samples.
The impurities in piperaquine phosphate bulk drug substance were detected by a newly developed gradient phase HPLC method and identified by TOF-MS and ESI-MS. The structures of impurities were confirmed by NMR. Forced degradation studies were also performed for the stability of piperaquine phosphate bulk drug samples and the specificity of the newly developed HPLC method. In silico toxicological predictions for these piperaquine phosphate related impurities were made by Toxtree® and Derek®.
Twelve impurities (imp-1– 12) were detected and identified, of which eight impurities (imp-1, 2, 4, 6–10) were first proposed as new related substances. Based on TOF-MS/ESI-MS and NMR analysis, the structures of imp-2, 6 and 12 were characterized by their synthesis and preparation. The possible mechanisms for the formation of impurities were also discussed. These piperaquine phosphate related impurities were predicted to have a toxicity risk by Toxtree® and Derek®.
From forced degradation and bulk samples of piperaquine phosphate, twelve compounds were detected and identified to be piperaquine phosphate related impurities. Two of the new piperaquine phosphate related substances, imp-2 and imp-6, were identified and characterized as 4-hydroxy-7-chloro-quinoline and a piperaquine oxygenate with a piperazine ring of nitrogen oxide in bulk drug and oxidation sample, respectively. The MS data of imp-1, 2, 4, 6–10 were first reported. The in-silico toxicological prediction showed a toxicity risk for piperaquine related impurities by Toxtree® and Derek®.
Malaria, caused by the mosquito-borne protozoan parasite Plasmodium falciparum, is one of the major global public health challenges with an estimated 219 million clinical cases and 655,000 in 2010, mainly in children aged less than five years old from sub-Saharan Africa[1, 2]. Piperaquine, 1,3-bis-[4-(7-chloroquinolyl-4)-piperazinyl-1]-propane, is an anti-malarial compound belonging to the 4-aminoquinolines, which was first synthesized as compound 13228 RP by Rhone Poulenc in France in the 1950s. Piperaquine was rediscovered by Shanghai Research Institute of Pharmaceutical Industry in the 1960s and in 1970s, and rapidly replaced chloroquine as first-line monotherapy in southern China, until resistance emerged in the 1980s.
Recently piperaquine has received renewed interest in treatment of drug resistant falciparum malaria, as it has proved to be a suitable partner drug in artemisinin-based combination therapy (ACT) to improve anti-malarial effectiveness and to keep the selection of drug-resistant parasites to minimum. Meanwhile, it is now commercially available in fixed combination products, mostly with dihydroartemisinin, which are proved to be highly efficacious for treatment of uncomplicated falciparum malaria[5, 6]. The anti-malarial therapeutic efficacy studies conducted in Cambodia India and Vietnam, showed that for Plasmodium vivax and P. falciparum infection the therapeutic efficacy of the treatment of dihydroartemisinin-piperaquine remained high (100%) as an appropriate new first-line treatment[6–8]. In China, the piperaquine tablets were recommended at the dose of 600 mg monthly to prevent malaria. In the toxicological and clinic research, the most common adverse effects of piperaquine are dizziness, headache and gastrointestinal symptoms (nausea, vomiting, diarrhoea and abdominal pain) with less frequent side effects including urticaria, elevated serum alanine aminotransferase (ALT), low serum glucose, prolonged electrocardiographic QT interval and decreased white cell count[9–11]. An evaluation of piperaquine for reproduction did not show any genotoxic or clastogenic potential. No evidence of adverse effects on pregnancy in humans and animals has been observed[12, 13]. The piperaquine combination exerted a significant treatment and post-treatment prophylactic effects, indicating that piperaquine is a new partner drug of ACT displaying high efficacy and safety in the treatment of malaria.
The quality of a drug product is related not only with the contents of the active drug substances, but also with its impurities. Though there is an ever-increasing attention on impurity profile, just Chinese Pharmacopeia has already established specification limits for the total related impurities of piperaquine phosphate by HPLC-UV method. Zhang et al. developed an LC method for the analysis of piperaquine phosphate and related substances with the impurities limit of 0.21% - 0.39% under photo degradation condition. Now, it is mandatory to identify and characterize the impurities in the pharmaceutical product, if present above the accepted limits of 0.1%. Dongre et al. detected and identified only four impurities, such as 7-chloro-4-piperazinyl quinoline, 1-chloro-3-(7-chloro-4-quinolyl-4-piperazinyl) propane, 1-(1-5-chloro-4-quinolyl-4-piperazinyl)-3-(1-7-chloro-4-quinolyl-4-piperazinyl) propane and 1,4-bis-(4,7-dichloroquinoline) piperazine in piperaquine phosphate bulk drug substance by gradient reverse phase high performance liquid chromatographic (HPLC) and LC/MS/MS methods. The structures of three impurities were synthesized and confirmed by NMR and IR. Although these studies based on HPLC, LC-MS/MS and spectroscopic methods were reported in the literature for the quality and quantitative analysis of piperaquine phosphate and its impurities[14, 15, 17], there is few published studies of the complete characterization of related products or impurities in piperaquine phosphate as active pharmaceutical ingredient.
In this study, twelve potential impurities were detected, including new degradants, in piperaquine phosphate bulk sample using a newly developed gradient reversed phase HPLC methods. A comprehensive study was undertaken for the identification of these impurities by LC-TOF/MS and ESI-MS followed by their synthesis and further characterization by NMR. The in silico toxicological evaluation of these impurities was exerted by Toxtree® and Derek®.
Samples and chemicals
The reference standards of piperaquine phosphate (purity > 99.0%), piperaquine phosphate bulk samples, 4-hydroxy-7-chloro-quinoline (imp-2) (purity > 99.0%) and 1, 4-bis-(4, 7-dichloroquinoline) piperazine (imp-12) (purity > 99.0%) were kindly provided by Chongqing Southwest No.2 Pharmaceutical Factory Co., LTD. 1, 3-bis [1, 4-(4,7-dichloroquinoline) piperazin] propane nitrogen oxides (imp-6) (purity > 98.0%) was prepared by HPLC in our laboratory from piperaquine phosphate forced degradation samples. Acetonitrile of HPLC grade was used for the analytical HPLC analysis, and purchased from Merk, Darmstadt, Germany. Deionized water (18 MΩ cm) was prepared with a Millipore Milli Q-Plus purification system (Millipore Corp., MA, USA). Ammonium acetate and ammonia water were of analytical reagent grade and purchased from Sigma-Aldrich (St Louis, USA). Other reagents were analytical reagent grade and purchased from Nanjing Chemical Co. (Nanjing, China). The NMR solvent of dimethyl sulphoxide-d6 and tridecafluoroheptanoic acid-d were purchased from Merk, Darmstadt, Germany.
The HPLC-PDA chromatographic system consisting of a Hitachi Chromaster separation module and a Hitachi Chromaster photodiode array detector (Hitachi, Tokyo, Japan) was used for analytical and preparative separations with Empower 3.0 software (Milford, MA, USA). HPLC separation was performed on a Phecda C18 analytical column (250 mm × 4.6 mm, 5 μm) at temperature of 30°C. The detection wavelength was set at 317 nm. The gradient elution at the flow rate of 1.0 mL/min was employed with acetonitrile as mobile phase A and 0.1% ammonium acetate solution (pH adjusted to 7.0 by using ammonia water) as mobile phase B, with the gradient programme of time (min)/% A: 0/40, 5/40, 54/100, 54.1/40, 60/40. The sample injection volume was 20 μL.
TOF-MS and ESI-MS conditions
Accurate mass measurements were performed on an Agilent 6224 accurate-mass time-of-flight (TOF) mass spectrometer with qualitative Analysis B.04.00 software (All Agilent Technologies, Santa Clara, CA, USA). The operating parameters in the positive ion detection mode were as follows: drying gas (N2) flow rate, 10.0 L/min; sheath gas temperature, 350°C; capillary, +4000 V; fragmentor, 135 V; skimmer,; collision energy,; and mass range, 100–1500 Da. The ESI-MS/MS spectra was carried out by Thermo-Finnigan TSQ Quantum Ultra tandem mass spectrometer equipped equiped with an electrospray ionization source (ESI), and Xcalibur 1.4 software was used for data acquisition and processing (All Thermo-Finnigan, San Jose, CA, USA). The mass spectra of ESI-MS/MS were recorded in the same ion detection mode to analysis the fragment ions of the related substances. The spray voltage was set at 5000 V. The heated capillary temperature was 350°C. The sheath gas and the auxiliary gas were set at 45 and 10 psi, respectively. The fragment ions were produced by collision-induced dissociation of the selected precursor ions with the collision energy of 35 eV. In the LC-MS/MS measurements chromatographic conditions described in the section of “Chromatographic conditions” were used.
1H and 13C NMR spectroscopy
The 1H, 13C NMR spectra of the impurities was performed on Bruker AVANCE DRX-500 spectrometer using dimethyl sulphoxide-d6 as solvent and tetramethylsilane (TMS) as internal standard.
Preparation of forced degradation samples
Forced degradation studies can identify the degradation products, establish the degradation pathways and find the intrinsic stability of the molecule. The preparation of all forced degradation samples were conducted by stressing with acid (0.1 M HCl, 60°C, 30 min), alkaline (0.1 M NaOH, 60°C, 30 min), hydrolysis and oxidation (30% H2O2, room temperature, 30 min) and photo (UV light and cool white fluorescent, 10 days) according to option 2 of Q1B in ICH guidelines. The degraded samples were neutralized (for acidic and basic hydrolysed) and diluted to final concentration of 800 μg/mL before the assay of the degradation impurities.
Enrichment of impurity-6 in oxidation samples
The isolation and enrichment of imp-6 was performed on a Shimadzu LC-2010 HT Liquid Chromatograph equipped with a SPD-10AVP UV–vis detector (Shimadzu Corp., Kyoto, Japan). The Chromatographic conditions were performed according to the section of “Chromatographic conditions”. The test solution of oxidation samples (30% H2O2, room temperature, 12 h) was prepared at the final concentration of 300 μg/mL. The imp-6 solution was repeatedly collected at the retention time region of 5.8-6.3 min, before evaporated to dryness under high vaccum. The residue of imp-6 was obtained with the purity above 98% based on HPLC analysis by area normalization method.
In silico toxicological predictions
The structure-activity relationships ((Q)SAR), based on the concept that chemical structure determines the biological activity of a molecule, are employed as scientifically credible tools for predicting the acute toxicity of chemicals relevant to public and animal health. Recently, these (Q)SAR programmes will play an important role in future chemical policies, such as in the European Union and the Netherlands, to reduce animal testing and costs and to speed up the number of risk assessments for hazardous chemicals. To evaluate the toxicological characters of piperaquine related impurities in silico, Toxtree® (v.1.60, Ideaconsult Ltd., Sofia, Bulgaria) and Derek® (Nexus v3.0.1, Lhasa Limited, Leeds, UK) were selected from different two sources of toxicity predictions[19, 20]. Toxtree® is a full-featured and flexible user-friendly open source application, which is able to estimate toxic hazard by applying a decision tree approach and making (Q)SAR-based predictions for a number of toxicological endpoints by different modules. Three Toxtree® modules, such as Cramer rules with extension, Bengni/Bossa rulebase for mutagenicity and carcinogenicity and structure alerts for the in vivo micronucleus assay in rodents, were used to generate hazard estimations. Derek® for windows, a knowledge-based expert system, predicts the toxicity of a compound from its chemical structural alerts, rules and examples, which describes relationship between a structural feature (toxicophore) and its associated toxicity. A broad range of toxicological endpoints are covered, including carcinogenicity, genotoxicity, hepatotoxicity, HERG channel inhibition, reproductive toxicity and skin sensitization.
Results and discussion
Detection of impurities by HPLC-UV/DAD
Forced degradation experiment was performed by exposing piperaquine phosphate bulk to diverse stress conditions for different periods. Degradation was not observed in piperaquine forced samples subjected to photo and acid. Significant degradation of the drug substance and product was detected under basic and oxidative forced conditions, leading to the formation of imp-6–10. Peak purity test results derived from DAD detector, confirmed that the piperaquine peak and all of the impurity peaks (imp-1–12) were homogeneous and pure in all of the forced and bulk samples.
Structure elucidation of related impurities by HPLC-ESI-MS/TOF-MS
The imp-1 and the imp-2 (Figure 2), with accurate positive ions at m/z 180.0208 and 180.0207, had the same molecular formula for pseudomolecular ion (C9H7ClNO+). In the MSn spectrum of imp-2, the main fragment ions at 145, 117, 111 and 89 were attributed to the structure of 7-chloro-quinoline. According to the synthetic route of piperaquine and the literature, the probable structure of imp-2 could be 4-hydroxy-7-chloro-quinoline. The pseudomolecular ion of imp-1 at m/z 180 produced ions at m/z 162 (-H2O) and 144 (-HCl). Further fragmentation of the ion at m/z 144 yielded an ion at m/z 116 by the loss of -CO group, which indicated that a hydroxyl group substituted at a different position of imp-2. Thus, the proposed structure of imp-1 could be 5-hydroxy-7 -chloro-quinoline. The imp-4 (Figure 2) with the accurate protonated ion at m/z 179.0369, yielded the ion at 144 with the same ion of the imp-1 at 162, by the loss of -NH3 group (-17 Da) and chlorine radical (-35 Da), respectively. Furthermore the fragment ion at m/z 162 produced the ion at m/z 127 by the loss of chlorine radical. The fragmentation of ion at mz/117 was attributed to the ion at m/z 144 by the rearrangement of quinoline ring-opening from six- to four-numbered ring, which was consistent with the structure of (7-chloro-quinoline-4-yl) piperazine. Thus, the proposed structure of imp-4 could be 4-amino-7-chloro-quinoline. The probable fragmentation pathways of imp-1, imp-2 and imp-4 were shown in Figure 2.
The imp-3 (Figure 3) with the accurate [M + H]+ ion at m/z 248.0954, produced the abundant ion at m/z 205 by ring-opening (-43 Da). Further fragmentation of the ion at m/z 205 yielded ions at m/z 191 and 177 by the rearrangement (Figure 3). According to the main fragment ions at m/z 205, 191 and 177, it was inferred that the probable structure of imp-3 could be (7- chloro-quinoline-4-yl) piperazine. The imp-5 (Figure 3) with the accurate [M + H]+ ion at m/z 306.1378, produced the same fragmentation pattern as imp-3 with the abundant ions at m/z 205, 191 and 164, which indicated that the structure of the imp-5 also could contain (7-chloro-quinoline-4-yl) piperazine. The presence of minor ion at m/z 102, which was formed by piperazine ring-opening (-204 Da), indicated that the probable structure of imp-5 could be 1-hydroxy-3-(7-chloro-4-quinolin-4-piperazinyl) propane. The imp-12 (Figure 3) had the accurate [M + H]+ ion at m/z 409.0987, with the same main fragment ions as imp-3 and imp-5 at m/z 205, 177 and 164, which suggested that the structure of imp-12 could also contain (7-chloro-quinoline-4-yl) piperazine. Considering the published data and the synthetic route, the imp-12 could be produced due to excess 4, 7-dichloro-quinoline. As a consequence, the proposed structure of imp-12 was deduced as 1, 4-bis-(4, 7-dichloroquinoline) piperazine.
The imp-11 (Figure 3) had the same molecular weight as piperaquine with the accurate protonated ion at m/z 535.2146. The main fragmentation pattern at m/z 288, 260 and 217, was identical to that of piperaquine. It could be concluded that the chlorine atom was substituted on C-5 position of a quinoline ring of imp-11, instead of C-7 position of a quinoline ring of piperaquine.
1 H NMR data of related impurity 6 of piperaquine phosphate
Number of protons
Proton chemical shift, δH
J b (/Hz)
4.35 ~ 4.37
4.26 ~ 4.28
4.07 ~ 4.12
4.16 ~ 4.21
The imp-7 (Figure 4) with the accurate protonated ion at m/z 585.2160, which was 50 Da higher than that of piperaquine, indicated that piperaquine was replaced by three hydroxyl groups with a piperazine ring opening. According to the main fragment ions at m/z 374 and 288, and the synthetic route of piperaquine, it was inferred that the structure of imp-7 could also be a piperaquine oxygenate. The probable fragmentation pathways of imp-7 were shown in Figure 4.
For the imp-9 (Figure 4), the accurate [M + H]+ ion at m/z 501.2536 was 34 Da less than that of piperaquine, suggested a chloro quinoline ring of piperaquine could lose a chlorine atom. A most abundant ion at m/z 288 was also observed in the MS2 spectrum of piperaquine. The other main fragment ions at m/z 254, 266 and 211 were consistent with those of piperaquine without a chlorine atom. Thus, the probable structure of the imp-9 could be 1-(1-4-quinolyl-4-piperazinyl)-3-(1-7-chloro-4-quinolyl-4-piperazinyl) propane. The ESI-MS and TOF-MS data and probable fragmentation pathways of related impurities in piperaquine bulk drug are shown in Figures 2,3,4 and5.
Structure confirmation of impurities by 1H and 13C NMR
1 H, 13 C NMR data of related impurity (2 and 12) of piperaquine phosphate
δH(J b /Hz)
7.95 (1H, d, 7.4)
8.45 (2H, d, 7.1)
6.10 (1H, d, 7.4)
7.09 (2H, d, 7.2)
11.91 (1H, s)
8.11 (1H, d, 8.7)
8.33 (2H, d, 9.3)
7.33 (1H, d, 10)
7.71 (2H, d, 7.8)
7.63 (1H, s)
8.07 (2H, d, 1.7)
4.48 (8H, s)
The TOF-MS and ESI-MS analysis of imp-6 provided a molecular formula of C29H32Cl2N6O ([M + H]+, m/z 551.2094). The 1H-NMR and 1H-1H COSY spectrums showed that the presence of quinoline ring signals [δH 8.27 (2H, d, J =25.8 Hz, H-8, 8′), δH 8.88 (2H, d, J = 6.35 Hz, H-2, 2′), δH 7.77 (2H, d, J = 9 Hz, H-6, 6′) and δH 7.48 (2H, d, J = 6.4 Hz, H-3, 3′). The presence of eight methylene group signals [δH 4.34 ~ 4.37 (4H, m, H-12), δH 4.26 ~ 4.28 (4H, m, H13), δH 4.07 ~ 4.12 (4H, m, H-19) and δH 4.16 ~ 4.21 (4H, m, H-20)], indicated that these methylene groups were located at two piperazine rings. Furthermore, three methylene group signals [δH 3.71 (2H, br, H-15), δH 2.73 (2H, br, H-16) and δH 3.46 (2H, br, H-17)] were observed, with significant correlation in the 1H-1H COSY spectrum, and H-15 had an downfield shift due to oxidation at C-14. Thus, imp-6 was characterized as shown in Figure 6.
As to imp-12, ESI-MS and TOF-MS data showed the accurate protonated ion at m/z 409.0987, with a molecular formula of C22H18Cl2N4. The 1H and 13C NMR data of imp-12 were in agreement with the literature data, thus the structure of imp-12 was confirmed as 1, 4-bis-(4, 7-dichoroquinoline) piperazine (Figure 6).
Formation of impurity
In the HPLC-UV/DAD, ESI-MS and TOF-MS experiments, twelve related impurities were detected in piperaquine phosphate bulk drug. The starting material for piperaquine phosphate, i.e. 4, 7-dichloro-quinoline, was confirmed by the literature, and the imp-1, 2, 4 were the isomers of 4, 7-dichloro-quinoline bulk. According to the synthetic route, the imp-3, 5, 11, 12 were the by-product in the synthetic reaction of piperaquine phosphate. Based on the experiment of forced degradation samples, the imp-6–8, 10 were the oxidation products and the imp-9 was the degradation product of piperaquine phosphate. The possible mechanism of formation of impurities was depicted in Figure 5.
In silico toxicological predictions o f impurities
To evaluate general toxicological and carcinogenic alerts for the related impurities of piperaquine in silico, Toxtree® and Derek®, the knowledge-based expert systems, were used from different two (Q)SAR programs. Since the imp-2, 6, 12 were the main related impurities in piperaquine bulk, the toxicity profiles of three impurities were of paramount importance. By the module of the Cramer rules with extensions in Toxtree®, the imp-2, 6, 12 were predicted to general toxicity risks (class III). Based on Benigni/Bossa rulebase for mutagenicity and carcinogenicity, three related impurities were predicted negative for carcinogenicity (genotox and nogenotox) and mutagenicity. The predicted results of the module of structure alerts for the in vivo micronucleus assay in rodents, showed that the imp-6 and 12 were all H-acceptor-path3-H-acceptors except the imp-2. Derek® predicted several toxicity alerts for the imp 2, 6, 12: carcinogenicity in mammal (imp-2), hERG channel inhibition (imp-6 and 12), hepatotoxicity (imp-6 and 12), mutagenicity (imp-2) and alpha-2-mu-Globulin nephropathy (imp-12).
The other piperaquine related impurities were also predicted by Toxtree® to have a high general toxicity risks similar with the imp-2, 6, 12 (class III). Furthermore, the imp-1, 3, 5 and 7–11 were predicted negative for carcinogenicity (genotox and nogenotox) and mutagenicity, while the imp-4 structure of primary aromatic amine led to structural alert for genotoxic carcinogenicity. From the module of structure alerts for the in vivo micronucleus assay in rodents, the imp-5 and 7–11 were also H-acceptor-path3-H-acceptors, due to the similar structures with the imp-6 and 12. The prediction results of Derek® indicated a limit toxicity profile for other impurities, such as carcinogenicity for the imp-8, hERG channel inhibition for the imp-3–6 and imp-8–11, hepatotoxicity for the imp-4, 6, 7, 9–11, skin sensitization for the imp-1, 8 and alpha-2-mu-Globulin nephropathy for the imp-4, 7–11. Only the imp-3 showed a non-toxic prediction compared to other impurities.
According to the toxicological concern, the daily dosage of compounds classified in class III should be below 90 μg/person (60 kg)/day to be validated as non toxic. Therefore, the toxicity predicts of imp-1–12 provide valuable data for clinical use of piperaquine dose. In China, the use of the piperaquine preparations is cautioned for pregnant women and patients with severe acute liver, kidney and heart diseases.
Twelve impurities of piperaquine phosphate bulk drug were detected by HPLC-UV/DAD, ESI-MS and TOF-MS. The structures of impurities were proposed on the basis of ESI-MS and TOF-MS, fragmentation mechanism and synthetic procedure. The imp-2, 6 and 12, three main related impurities, were synthesized or isolated from the oxidation samples of piperaquine phosphate by column chromatography and these structures were confirmed by NMR spectrum. Starting material along with impurities, synthetic by-products, oxidation and degradation were the main sources for the formation of these impurities. The in-silico toxicological investigation (Toxtree® and Derek®) indicated three main related impurities (imp-2, 6 and 12) had general toxicity risks and nogenotox, which provided the useful data in the research of piperaquine.
The authors are thankful to Key Laboratory of Drug Quality Control and Pharmacovigilance (China Pharmaceutical University, Ministry of Education), China for technical assistance to this work.
- Askling HH, Bruneel F, Burchard G, Castelli F, Chiodini PL, Grobusch MP, Lopez-Vélez R, Paul M, Petersen E, Popescu C, Ramharter M, Schlagenhauf P: Management of imported malaria in Europe. Malar J. 2012, 11: 328-10.1186/1475-2875-11-328.PubMed CentralView ArticlePubMedGoogle Scholar
- WHO: World Malaria Report 2012. 2013, Geneva: World Health Organization, http://www.who.int/malaria/mpac/mar2013/en/] [Accessed on 26 June 2013 at 17:27]Google Scholar
- Chen L, Qu FY, Zhou YC: Field observations on the antimalarial piperaquine. Chin Med J (Engl). 1982, 95: 281-286.Google Scholar
- Roll Back malaria Technical Consultation: Antimalarial Drug Combination Therapy. 2001, Geneva: World Health Organization, 16-17. WHO/CDS/RBM/2001.35Google Scholar
- Naing C, Mak JW, Aung K, Wong JY: Efficacy and safety of dihydroartemisinin-piperaquine for treatment of uncomplicated Plasmodium falciparum malaria in endemic countries: meta-analysis of randomised controlled studies. Trans R Soc Trop Med Hyg. 2013, 107: 65-73. 10.1093/trstmh/trs019.View ArticlePubMedGoogle Scholar
- Leang R, Barrette A, Bouth DM, Menard D, Abdur R, Duong S, Ringwald P: Efficacy of dihydroartemisinin-piperaquine for treatment of uncomplicated Plasmodium falciparum and Plasmodium vivax in Cambodia, 2008 to 2010. Antimicrob Agents Chemother. 2013, 57: 818-826. 10.1128/AAC.00686-12.PubMed CentralView ArticlePubMedGoogle Scholar
- Yeka A, Tibenderana J, Achan J, D’Alessandro U, Talisuna AO: Efficacy of quinine, artemether-lumefantrine and dihydroartemisinin-piperaquine as rescue treatment for uncomplicated malaria in Ugandan children. PLoS One. 2013, 8: e53772-10.1371/journal.pone.0053772.PubMed CentralView ArticlePubMedGoogle Scholar
- Gargano N, Ubben D, Tommasini S, Bacchieri A, Corsi M, Bhattacharyya PC, Rao BH, Dubashi N, Dev V, Ghosh SK, Kumar A, Srivastava B, Valecha N: Therapeutic efficacy and safety of dihydroartemisinin-piperaquine versus artesunate-mefloquine in uncomplicated Plasmodium falciparum malaria in India. Malar J. 2012, 11: 233-10.1186/1475-2875-11-233.PubMed CentralView ArticlePubMedGoogle Scholar
- Davis TM, Hung TY, Sim IK, Karunajeewa HA, Ilett KF: Piperaquine: a resurgent antimalarial drug. Drugs. 2005, 65: 75-87. 10.2165/00003495-200565010-00004.View ArticlePubMedGoogle Scholar
- Ogutu BR, Onyango KO, Koskei N, Omondi EK, Ongecha JM, Otieno GA, Obonyo C, Otieno L, Eyase F, Johnson JD, Omollo R, Perkins DJ, Akhwale W, Juma E: Efficacy and safety of artemether-lumefantrine and dihydroartemisinin-piperaquine in the treatment of uncomplicated Plasmodium falciparum malaria in Kenyan children aged less than five years: results of an open-label, randomized, single-centre study. Malar J. 2014, 13: 33-10.1186/1475-2875-13-33.PubMed CentralView ArticlePubMedGoogle Scholar
- Rijken MJ, McGready R, Boel ME, Barends M, Proux S, Pimanpanarak M, Singhasivanon P, Nosten F: Dihydroartemisinin-piperaquine rescue treatment of multidrug-resistant Plasmodium falciparum malaria in pregnancy: a preliminary report. Am J Trop Med Hyg. 2008, 78: 543-545.PubMedGoogle Scholar
- Longo M, Pace S, Messina M, Ferraris L, Brughera M, Ubben D, Mazuè G: Piperaquine phosphate: reproduction studies. Reprod Toxicol. 2012, 34: 584-597. 10.1016/j.reprotox.2012.09.001.View ArticlePubMedGoogle Scholar
- Thanh NX, Trung TN, Phong NC, Quang HH, Dai B, Shanks GD, Chavchich M, Edstein MD: The efficacy and tolerability of artemisinin-piperaquine (Artequick®) versus artesunate-amodiaquine (Coarsucam™) for the treatment of uncomplicated Plasmodium falciparum malaria in south-central Vietnam. Malar J. 2012, 11: 217-10.1186/1475-2875-11-217.PubMed CentralView ArticlePubMedGoogle Scholar
- Editorial committee of the People’s Republic of China pharmacopoeia: The People’s Republic of China Pharmacopoeia. 2010, Beijing: China Medical Science PressGoogle Scholar
- Zhang XZ, Jang S, Mao Q: Determination of the related substances in piperaquine phosphate by HPLC. Chin Pharm Affairs. 2009, 23: 690-Google Scholar
- ICH guidelines-International Conference on Harmonization, Q3A (R2): Impurities in New Drug Substances CPMP/ICH/2737/99. 2006, http://www.ema.europa.eu/docs/en_GB/document_library/Scientific_guideline/2009/09/WC500002675.pdf], [Accessed on 25 July 2012 at 15:21]Google Scholar
- Dongre VG, Karmuse PP, Ghugare PD, Gupta M, Nerurkar B, Shaha C, Kumar A: Characterization and quantitative determination of impurities in piperaquine phosphate by HPLC and LC/MS/MS. J Pharm Biomed Anal. 2007, 43: 186-195. 10.1016/j.jpba.2006.07.005.View ArticlePubMedGoogle Scholar
- Munro IC, Renwick AG, Danielewska-Nikiel B: The threshold of toxicological concern (TTC) in risk assessment. Toxicol Lett. 2008, 180: 151-156. 10.1016/j.toxlet.2008.05.006.View ArticlePubMedGoogle Scholar
- Verbeken M, Suleman S, Baert B, Vangheluwe E, Van Dorpe S, Burvenich C, Duchateau L, Jansen FH, De Spiegeleer B: Stability-indicating HPLC-DAD/UV-ESI/MS impurity profiling of the anti-malarial drug lumefantrine. Malar J. 2011, 10: 51-10.1186/1475-2875-10-51.PubMed CentralView ArticlePubMedGoogle Scholar
- Suleman S, Vandercruyssen K, Wynendaele E, D’Hondt M, Bracke N, Duchateau L, Burvenich C, Peremans K, De Spiegeleer B: A rapid stability-indicating, fused-core HPLC method for simultaneous determination of β-artemether and lumefantrine in anti-malarial fixed dose combination products. Malar J. 2013, 12: 145-10.1186/1475-2875-12-145.PubMed CentralView ArticlePubMedGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.