- Open Access
Routine implementation costs of larviciding with Bacillus thuringiensis israelensis against malaria vectors in a district in rural Burkina Faso
© The Author(s) 2016
- Received: 27 April 2016
- Accepted: 12 July 2016
- Published: 22 July 2016
The key tools in malaria control are early diagnosis and treatment of cases as well as vector control. Current strategies for malaria vector control in sub-Saharan Africa are largely based on long-lasting insecticide-treated nets (LLINs) and to a much smaller extent on indoor residual spraying (IRS). An additional tool in the fight against malaria vectors, larval source management (LSM), has not been used in sub-Saharan Africa on a wider scale since the abandonment of environmental spraying of DDT. Increasing concerns about limitations of LLINs and IRS and encouraging results from large larvicide-based LSM trials make a strong case for using biological larviciding as a complementary tool to existing control measures. Arguments that are often quoted against such a combined approach are the alleged high implementation costs of LSM. This study makes the first step to test this argument. The implementation costs of larval source management based on Bacillus thuringiensis israelensis (Bti) (strain AM65-52) spraying under different implementation scenarios were analysed in a rural health district in Burkina Faso.
The analysis draws on detailed cost data gathered during a large-scale LSM intervention between 2013 and 2015. All 127 villages in the study setup were assigned to two treatment arms and one control group. Treatment either implied exhaustive spraying of all available water collections or targeted spraying of the 50 % most productive larval sources via remote-sensing derived and entomologically validated risk maps. Based on the cost reports from both intervention arms, the per capita programme costs were calculated under the assumption of covering the whole district with either intervention scenario. Cost calculations have been generalized by providing an adaptable cost formula. In addition, this study assesses the sensitivity of per capita programme costs with respect to changes in the underlying cost components.
The average annual per capita costs of exhaustive larviciding with Bti during the main malaria transmission period (June–October) in the Nouna health district were calculated to be US$ 1.05. When targeted spraying of the 50 % most productive larval sources is used instead, average annual per capita costs decrease by 27 % to US$ 0.77. Additionally, a high sensitivity of per capita programme costs against changes in total surface of potential larval sources and the number of spraying repetitions was found.
The per capita costs for larval source management interventions with Bti are roughly a third of the annual per capita expenditures for anti-malarial drugs and those for LLINs in Burkina Faso which are US$ 3.80 and 3.00, respectively. The average LSM costs compare to those of IRS and LLINs for sub-Saharan Africa. The authors argue that in such a setting LSM based on Bti spraying is within the range of affordable anti-malarial strategies and, consequently, should deserve more attention in practice. Future research includes a cost-benefit calculation, based on entomological and epidemiological data collected during the research project.
- Bacillus thuringiensis israelensis
- Vector control
- Cost analysis
- Larval source management
- Burkina Faso
- West Africa
Malaria is still the most common vector-borne disease in sub-Saharan Africa, although the global number of cases and deaths diminished considerably since the 2000s, by 18 and 48 %, respectively . The former goal of global malaria eradication has been followed by an intensive public health focus on malaria control. Encouraged by recent control success, several countries now declared malaria elimination their policy target [2, 3]. Despite the historical success of malaria vector control through larval source management (LSM) , this method plays only a minor role on today’s sub-Saharan African policy agendas. Malaria vector control is mainly focused on strategies targeting adult mosquitoes. Long-lasting insecticide-treated nets (LLINs) are considered the first-line vector control intervention supported by indoor residual spraying (IRS) for selected settings. These methods, indeed, prove to be highly effective but challenges remain due to mosquito resistance to insecticides [5–8] and the presence of mosquitoes which feed and rest outdoors . In this light, malaria vector control through larval source management shows high potential to work as a complementary strategy for effective malaria control systems.
Larvicides based on the mosquito-specific toxins produced by Bacillus sphaericus (Bs) and Bacillus thuringiensis israelensis (Bti) are promising tools for larval control. The selective nature of bacterial larvicides predestines them for the use in community settings. While essentially non-toxic in their natural state, once ingested and digested by immature mosquitoes, these toxins selectively kill the larvae of vulnerable mosquito species [10–12]. The advantage of targeting the larval stages of mosquito vectors is that they are immobile, and in most environmental settings present in well-defined and easily accessible places. Unlike adult mosquitoes they cannot change their behaviour to avoid control activities . These larvicides operate on unique modes of action, allowing their use in resistance management programmes in vector control. In contrast to many other insecticides, to date no resistances to Bti have been observed in major malaria vectors .
Bti has been successfully used for decades in high-income countries, primarily against nuisance mosquitoes, such as floodwater mosquitoes . However, in countries where vector borne diseases are most prevalent, LSM is still a widely neglected approach, and its application, with some exceptions, is limited to research settings. Nevertheless, this limited strand of empirical evidence shows LSM to be effective in reducing malaria transmission in various settings . Most formulations of Bti show a strong lethal effect on larval populations that lasts between 1 and 2 weeks, leading to substantial reductions in adult vector densities [16–21]. Recent studies in East Africa have shown that larval control can reduce the abundance of malaria mosquito larvae and adult females by more than 90 % [22–24] and that combined with long-lasting impregnated nets (LLINs) a twofold reduction in new malaria infections can be achieved compared to LLINs alone . Further evidence was generated in Eritrea, where LSM as an additional component in the vector control programme led to a reduction of malaria of more than 50 % .
Until now, one of the main factors preventing broader implementation of LSM programmes is the perception that they come with comparably high costs and require complex supply infrastructure. This is partly reflected by the World Health Organization’s stance towards LSM. While the WHO recently adapted its guidelines for Bti-based LSM and now recommends it for urban settings, rural areas are still considered ineligible due to alleged high programme costs . To the authors´ knowledge, this cost argument has not been convincingly confirmed by empirical evidence, so far. Based on detailed cost information gathered during the implementation of a large-scale Bti based LSM programme (henceforth called LSM) in rural Burkina Faso this study assesses the per capita programme costs for two different treatment choices. Cost calculations have been made transparent and reproducible for other settings by providing an easily applicable and adaptable cost formula. In addition, this study takes a disaggregated look at the programme cost structure by assessing the sensitivity of per capita programme costs with respect to changes in the underlying cost components.
Home base of the project was Nouna, the capital town of the Kossi region, situated in the North Western part of Burkina Faso, close to the Mali border. Nouna itself with about 25.000 inhabitants is characterized as semi-urban while the surrounding villages are rural. The health district comprises 127 rural villages ranging in size from several hundred to a maximum of a few thousands inhabitants. The population covered by the health district aggregates to a total of 156,000 (2013) and is served by a total of 43 rural health centres, delivering basic medical treatment within their catchment area of on average 15 km radius . Furthermore, those health centres serve as bases for health interventions, such as the distribution of insecticide-treated bed nets (ITNs) and vaccination campaigns.
Malaria transmission occurs throughout the year in Nouna, with a seasonal peak during the late rainy season between August and September. The entomological inoculation rate (EIR) which is defined as the number of infective bites per person per year amounted to 140 in 2002 for the area around Nouna  compared to an average of 700 for the Sahel region of West Africa [28, 29]. The study area has been subject to a wide set of malaria control interventions including the distribution of ITNs , intermittent preventive treatment in pregnancy (IPTp), and early diagnosis and treatment of malaria cases. Indoor residual spraying (IRS) is not implemented.
Treatment of all larval sources with Bti every 10 days (in the following called S1 scenario).
Targeted treatment of the 50 % most productive larval sources, leaving the remaining 50 % least productive larval sources untreated (in the following called S2 scenario). The criterion “most productive” was based on entomologically validated risk maps, described elsewhere [32, 33].
Untreated control group with no larviciding performed.
Assessment of project costs
Data were taken from the recorded project expenditures of the EMIRA project (Ecologic Malaria Reduction for Africa) . Recorded cost information was translated into a spreadsheet-based cost-report, presented in the Appendix (Additional file 1: Table S1). For each component of the spraying programme, data were gathered from various sources. Larvicide consumption was recorded for each spray round at village level. Wages for fieldworkers were calculated based on the number of days worked for the programme, multiplied by a fixed daily rate. Costs for machinery, equipment and the larvicide, as well as their shipping costs were obtained from invoices and sales receipts from all project partners. A discount rate to calculate the annualized economic costs was not applied for two reasons. First, most of the capital costs (knapsack sprayers and field material) are only used during the project duration and their recovery value is difficult to determine. Second, some of the equipment used for the application of GPS, computer and satellite imagery was provided within the infrastructure of the host organization. Savings accrued from these in-kind benefits broadly outweigh potential cost reductions that may arise from writing down other assets to their annualized economic costs. The acquisition of satellite imagery and personnel costs for risk map creation were captured similarly. Costs were measured in the currency of the respective country (e.g. USA [US$], Germany/France [€], Burkina Faso [FCFA], and converted into US$ using a 2013 through 2015 average exchange rate of 1US$ = 0.82 € = 531 FCFA (oanda.com). Consumables and utilization of existing resources at the research centre (cars and drivers, etc.) were recorded using the research centre´s charges and allowances. Opportunity costs were excluded, (missed potential gains from alternative interventions when one intervention has been chosen) and the focus put on financial costs only.
In a further step, all research-related costs such as impact evaluation and university salaries that would not incur in a routine intervention were excluded. This step allowed for a cost comparison with other vector control approaches such as LLINs and IRS. Costs of international staff were replaced with those for local personnel where possible. External specialists for LSM, remote sensing and risk map creation were kept since those might not be locally available in comparable settings.
Accrued project implementation costs were recorded for both treatment scenarios, which accounted for roughly one-third of the study population each. These costs were extrapolated to the entire health district comprising 127 rural villages and the district capital. Based on practical experience gathered during implementation, the following adjustments were performed before conducting the scale-up calculations. Due to high heterogeneity in size and number of larval breeding sites across villages, an hour-based pay scheme was introduced to account for the varying workloads for spray personnel. Equally, the fixed number of two sprayers per village employed during the research project was adjusted to one person who is paid for the hours worked. For a small percentage of spray-intensive villages additional spray personnel was budgeted. This means the personnel needs between different treatment scenarios are expressed through workload and not by the number of people per se.
An estimated total of 150 persons would be needed to cover the entire health district including the district capital. This roughly translates into one person per village plus 15 additional sprayers reserved for some villages which show more than 1.5 hectares of larval sources, which is roughly the surface that can be treated by one person per day. These adjustments differ from the setup in the research project, where the required workforce was overestimated for most villages and two fieldworkers with spraying equipment were employed per village. According to the personnel adjustments from above a total of 25 supervisors would be needed to ensure quality control of the larviciding actions by revisiting larval sources and sampling larvae.
Modelling of programme costs
Baseline, minimum and maximum values for parameters that influence project costs
Determination of range
US$ per kg
Price of larvicide including freight costs
Kg per hectar
Times per year
Number of spray rounds per year
Total surface to treat within the region of intervention
Percentage of possible larval sources that receives treatment (exhaustive treatment = 100 %, targeted control = 50 %)
1 in S1 scenario 0.5 in S2 scenario
Depending on defined scenario.
US$ per person
Costs for knapsack sprayers and protective clothes per sprayer including freight costs
Hectar per hour
Surface that one sprayer can treat per hour
Hours per working day
Number of hours that spray teams work per day
Common workloads occurring during the research project
US$ per hour
Hectar per hour
Surface that one supervisor can control per hour (larvae dipping)
US$ per hour
Percentage of treated surface that the supervisors check with larvae dipping for quality control
Limits considered to be still sound (lower limit) and economically justifiable (upper limit)
Cost for project manager
Cost for LSM specialist
Cost for community sensitization
Cost for training events
Cost for mapping equipment
Mapping of larval sources
GIS map creation
Risk map creation
US$ per repetition
Transport costs, gas and allowance for fieldworkers
Percentual share added to the subtotal costs
Common additions for overheads in research projects
Larvicide needs and spraying apparel (Eq. 2)
Total larvicide-related costs (CLARV) contain the cost for obtaining the needed quantity of larvicide (C BTI ) as well as corresponding spraying material (C BTIMAT ) and are presented in Eq. (2).
First, CLARV depends on the exogenously given larvicide market price (C PBTI ) measured in US$ per kg. Expenses for shipping the product from the US to Burkina Faso, including insurance and clearance fees (Manufacturer Valent Biosciences, exchange rates US$ to € averaged 2013–2015) were included. Storage of the product once it arrived at district level was considered under operations costs and overheads. The spraying interventions were run with VectoBac® WG, a water dispersible granule formulation of Bacillus thuringiensis israelensis strain AM65-52 from Valent BioSciences Corp., Illinois, USA with a potency of 3000 ITU/mg (International Toxic Units).
Second, larvicide-related costs depend on the ultimate choice of the utilized Bti concentration (BtiConc). In our setting, the Bti granules were suspended in water prior to usage and dispersed in stagnant environmental water bodies using knapsack sprayers (Model: 3595 INOX, Mesto Corp., Freiberg, Germany).
Third, the amount of larvicide needed depends highly on the duration of the intervention within a year, which for its part is driven by the onset and cessation of the rainy season. Moreover, implications for larvicide consumption arise from the treatment interval, the number of days one waits until the next spraying is conducted. When deciding on the optimal interval length the following trade-off arises: from a cost perspective the interval should be maximally stretched while shorter treatment intervals ensure that a maximum of larvae are hindered to develop into adult vector mosquitoes . Both factors, duration and treatment interval are reflected by the variable Repetitions, the number of treatments per year for every eligible unit.
Another factor exerting influence is the buffer radius chosen to be treated around a village, accounting for the mosquitoes’ flight range and their possible infiltration from outside into treated areas. The buffer radius is not separately included within the cost formula but is represented through the total surface of breeding sites in the vicinity of villages (TotalSurface). The variable CoveredSurface accounts for both treatment scenarios, the 100 % (CoveredSurface = 1) and the 50 % (CoveredSurface = 0.5) treatment.
A large-scale LSM programme requires the employment of different types of personnel. For project management, risk map creation, and entomological training highly trained professionals are required, while for spraying activities laypersons from the villages can be hired and trained within a short time. Calculation of personnel costs is based on the research centre´s guidelines, which follow recommendations by the ministry of health and may be similar within the region. Based on the experience, with a 5-month implementation period, spray personnel would have to work approximately only on 15 days in total.
Mapping and risk map creation (Eq. 6)
Sensitivity analysis of per capita intervention costs
The last part of our cost calculation approach describes the sensitivity analysis that builds on the Bti cost model (0). The variables chosen were either fixed a priori within the programme protocol, e.g. the surface of the treatment buffer around villages, the utilized Bti concentration, and the treatment interval (in the following called endogenous factors) or they were subject to local environmental settings, e.g. the average total surface of larval sources per village (in the following called exogenous factors).
Based on the reference values from our intervention, from literature and from own preceding field studies [17, 31], a reasonable interval with lower and upper limits for each variable was determined. Since the underlying baseline values were taken from effectively accrued costs, no confidence intervals were available to fix the minimum and maximum values. Instead we used a 20 % fluctuation range for most personnel and material costs. The variable population density was excluded from the formula. This is because those data are commonly only available for a predefined region but hardly for an area of treatment in and around villages. Instead the formula facilitates the calculation of total programme costs, which can afterwards easily be divided by the population domiciled in the villages that are covered by spraying activities.
R1 The price for Bti refers to the formulation and manufacturer used within the underlying field study (Vectobac® WG, formerly WDG, Valent Biosciences Corp.). With the same product, semi-terrain studies on lethal dosages were performed . The costs for the larvicide were combined with the costs for different freight options. The baseline and maximum values represent typical airfreight costs from the US to West African countries. Total airfreight costs increase virtually linearly with the amount of larvicide ordered. The minimum value represents the cheapest offer by sea cargo which is usually not bound to weight but to volume, e.g. per container space. The volatility of the dollar to euro exchange rate over the last 3 years was included into our minimum and maximum value calculations since many West African currencies are pegged to the Euro. Average exchange rates for 2013, 2014 and 2015 were used.
R2 The efficacy of Bti formulations against Culicidae larvae depends on various factors, including water pollution, water depth, water temperature and others. The baseline value corresponds to the concentration used during the study, the minimum value showed efficacy in semi-field trials in the region and could still be effective in achieving >95 % lethality on mosquito larvae. The upper threshold might be needed if Culex mosquitoes should become a target, which often breed in heavily polluted breeding sites.
R3 The number of repetitions is the product of the period of intervention (months per year) and the spraying frequency (spray rounds per month). It depends on the duration of the rainy season and the persistence of larval breeding grounds. The given minimum and maximum values do not only attribute for the interannual variations in the onset and duration of the rainy season  but reflect a possible shift of the region of implementation further North or South by some 100 km. The number of repetitions can be equally influenced by the use of other Bti formulations or differences in temperature which will determine the spraying frequency via their influence on larval development.
Accrued costs for LSM in the underlying research setting
All expenditures that accrued during the 3-year project were recorded and assigned to respective cost categories. The overall costs of the project as it was performed in the field amounted to US$ 563,690, including research related costs (see Additional file 1: Table S1). Those research related costs are provided by Additional file 1: Table S1 to increase transparency and to facilitate replicability. Research related costs were excluded during the following upscaling process. During the two intervention years of the study a total of 1800 kilograms of Bti powder were deployed, inducing expenditures of roughly US$ 73,000, including freight costs, this figure increases to US$ 94,000, accounting for 16 % of the total costs of the research project. Within the research setting personnel costs amounted to roughly US$ 322,000, which represents almost two-third of total programme costs. More than half of those costs were consumed by the salary of an external scientific coordinator. Additional US$ 50,000 were used for the implementation of impact evaluation tools. Research-related costs amounted roughly to US$ 257,000 which represents 45 % of total programme costs.; they would not incur during a routine implementation of larviciding activities.
Upscaling of per capita intervention costs
Costs for LSM in US$ in the Nouna health district comprising 127 rural villages and the semi-urban district capital
Following program year
Average annual costs over 3 years
Proportion of total costs (%)
Recurrent costs (personnel)
Project manager Burkina Faso
Air freight larvicide
In country travel and field work
Mapping of larval sources
Mapping for risk map creation
Air freight knapsack sprayers
GPS, computer, equipment
Overheads 10 %
Total program costs
Costs per person protected
The total annual costs averaged over 3 years for the S1 scenario were estimated at US$ 163,038 to cover 156,000 people in a mostly rural area with villages distributed over 4200 km2. The total annual costs for the S2 scenario amounted to US$ 120,239. The costs per person protected per year were calculated to be US$ 1.05 and US$ 0.77 for the S1 and S2 scenarios respectively. Over 3 years, the recurrent costs comprised about 80 % of the total programme costs for both S1 and S2. The highest share of costs was attributable to larvicide within the S1 scenario with 41.6 % of total costs while for the S2 scenario larvicide and its transport only amounted to 28.0 % of total costs. Personnel costs made up 34.7 % of total costs in the S1 scenario while their proportion was markedly higher in the S2 scenario with 42.7 %.
Sensitivity analysis of per capita intervention costs
The sensitivity analysis evaluates the responsiveness of the programme’s per capita costs towards changes in major cost component variables. Results are interpreted in a ceteris paribus fashion; A component’s effect on total programme costs is assessed while keeping all other cost components constant. The selection of input variables is directly based on the Bti cost model introduced in the above section (Eq. 1). Based on its magnitude, relevance and simplicity of interpretation the following five variables are included in the sensitivity analysis; TotalSurface, Repetitions, BtiConcentration, SprayerWage, BtiCost.
When substituting the hourly payment scheme of the costing model with a daily payment scheme based on the number of spray rounds performed, calculated costs increase by about 14 % (23 % for S2). A daily payment scheme is easier to implement in areas where one can find delimited villages rather than a coherent treatment area. In such a setting the amount of spraying apparel increases disproportionally since equipment will remain within one village even if there are only few breeding sites to treat. In a strictly village-based treatment scheme the difference between a S1 and a S2 scenario reduces because the minimum requirement of sprayers per village is one person. For more coherent settlements or areas with villages close to each other though, an hourly treatment scheme seems more appropriate to calculate costs, since spray personnel and knapsack sprayers can be distributed as needed within that region.
It was found that the implementation of a comprehensive LSM coverage of the Nouna health district, would incur annual per capita costs of US$ 1.05 (US$ 0.77 for S2 scenario) over a project lifetime of 3 years. Other studies [23, 35, 36] found similar values ranging between US$ 0.90 and 2.50, with the general tendency of lower per capita costs in urban settings. In the Upper-Rhine valley in Germany a mosquito control programme using Bti-based routine LSM has been carried out on a large-scale operational basis since 1992. It’s per capita costs of US$ 1.18, are in a comparable range  even though institutional, economic and environmental conditions are highly different. In this setting of a developed country, high population density and high degree of mechanization outweigh the relatively high costs for salaries. The calculated per capita intervention costs for Bti-based LSM in Burkina Faso compare with the lower limit of costs for indoor residual spraying, which range from US$ 0.88–4.94 per person protected . They are also slightly below the costs for long-lasting impregnated bed nets (LLINs) in sub-Saharan Africa, which are in the range of US$ 1.38–1.90 . The per capita costs for larviciding in the underlying setting were significantly lower than those for conventional ITNs which range between US$ 1.21 in Eritrea and US$ 6.05 in Senegal [38, 39] and were found to have median standardized costs of US$ 2.20 per year . Compared to the national per capita expenditures in Burkina Faso for LLINs and anti-malarial drugs which amount to US$ 3.00 and US$ 3.80, respectively , costs for larviciding were significantly lower.
The programme’s per capita costs were calculated in two different ways. The method of upscaling is naturally bound strongly to expenditures that were seized during the research project. The Bti cost model tries to unfold the programme’s underlying cost structure and, at the same time, provide an ex-ante assessment tool, suitable for LSM interventions in similar settings. In contrary to the up-scaled costs, the cost model generalizes more, e.g. the needed workforce is broken down on hourly base. As a result, per capita intervention costs slightly differ between both approaches. For the above comparison with other control measures we used the values calculated during the upscaling process.
The costs per person protected are driven mainly by two factors, the water surface to be treated and the number of inhabitants that benefit from the intervention in the respective village. Furthermore, the costs of larviciding depend on the region's ecology, e.g. the number of months with persisting larval sources in the environment. In the setting of North Western Burkina Faso, the highest transmission of malaria takes place during the 5 months of the rainy season (June through October). In areas with two rainy seasons or year round rainfall, the costs of a larviciding programme are likely to increase, while in areas with a shortened rainy season costs will decrease. Climatic changes might equally show impact on the required duration of larviciding activities in future .
There are limitations to the economically efficient application of LSM for areas with a high annual malaria transmission and vast areas covered by surface water [20, 43–45]. However, in the light of recent control efforts with LLINs, more areas show reduced malaria transmission during an increased number of months [25, 36]. This would make the additional implementation of larvicide-based LSM economically suitable even in previously unsuitable regions, provided it is part of integrated malaria control, i.e. applied together with medical treatment, LLINs and IRS. Although the WHO recommends that “larviciding should be considered for malaria control (together with or without other interventions) only in areas where the larval habitats are few, fixed and findable”  the Cochrane Review of Tusting et al.  summarized evidence for high success at reasonable costs even for regions where the WHO criteria are not fulfilled, which is in line with the results of this study.
The targeted treatment strategy might prove to be especially useful in settings with a high number of larval sources and a prolonged duration of vector abundance and hence malaria transmission. Here, reducing the area to be sprayed by targeting only highly productive water bodies using remote sensing could be an effective and cost-reducing option. It is known that not all water bodies are appropriate for malaria vector development [44, 46] and costs can be reduced if only those with increased larval productivity are treated [32, 33]. In this research setup, a threshold of 50 % of the expected most productive water bodies to treat within the larviciding scenario S2 was chosen. Though this threshold might be increased or lowered in view of different environmental conditions, it should ideally follow the absolute larval productivity per surface.
We found the S2 scenario to have roughly 26 % lower costs of treatment than the S1 scenario, primarily due to savings on larvicide and personnel costs. Results from the EMIRA study show an average mosquito reduction in the S2 study arm of roughly 65 %, compared to 80 % in the S1 scenario (Dambach, unpublished data). At a later stage, savings in treatment costs have to be thoroughly evaluated against the lower achieved reductions in vector abundance. Risk map based larviciding is particularly interesting for settings with a large number of environmental larval sources, since in such environments costs for larvicide and workforce increase disproportionally under a full coverage scenario. On the other hand, this requires a high prediction accuracy of the risk model and the existence of larval sources with low or no larval productivity . In settings where the majority of water bodies is infested with vector larvae, like it was the case in the study region, exhaustive larviciding would be the better choice. The deductions compare to results of some other studies that found high degrees of larval infestation regardless of the type of breeding site [48, 49]. In other areas with high heterogeneity in breeding site infestation, targeted interventions might be an opportunity to cut down on personnel costs as another large-scale trial has shown for dengue . Technological developments such as new larvicide formulations with longer residual effects through encapsulation and via the combination with other larvicides will substantially reduce treatment costs. Those would drop by roughly 25 % if the treatment intervals were extended from 10 to 14 days. Innovations such as airborne dispersal via unmanned aerial vehicles might further reduce programme costs .
The calculations presented here are the basis for a cost-effectiveness analysis to come, evaluating the entomologic and health impact indicators . A crucial factor for a cost-effectiveness analysis at a later stage is to measure the attributable effect of LSM on health outcome indicators. Cost calculations were based on the project duration of 3 years, although several items of the capital costs might have a significantly longer service life. If implemented as a routine vector control measure costs for personnel training and sensitization would equally decline.
Despite differences in climate, environment and population densities in other parts of Burkina Faso and neighboring countries, the presented findings can be a useful reference to calculate budget needs for similar implementations, be it regional or nationwide. Those would add onto the national health expenditures of US$ 39.00 per person and year . In developing countries such as Burkina Faso though, to date such an intervention, even if cost effective in terms of its protection against malaria, needs funding from external donors. In the light of our findings one of the main points of criticism towards LSM, their perceived high costs, should be revised for a number of settings. The results show that LSM based on Bti spraying can be an affordable complementary approach for integrated malaria control. Further in-depth research is needed to more comprehensively compare the programme costs and malaria control benefits across different approaches. With respect to this intervention study, such an analysis is planned for future research and will assess the cost-effectiveness based on parasitaemia and malaria-related morbidity and mortality.
There are several strengths and limitations to this study. To the authors' knowledge this is the first study that empirically assessed Bti larviciding costs in West Africa based on a large-scale LSM project. The presented cost report draws on effectively accrued expenses and serves as a reliable indicator for projects in similar settings. On the other hand, this very detailed calculation bears limitations. If the programme costs are to be compared with those from other settings, e.g. east Africa or Asia, differences in organizational frameworks and their guidelines such as from the ministry of health and locally performing institutions are likely to substantially affect the intervention’s cost structure.
A further problem of calculating programme costs is the exchange rate to foreign currencies. Many of the francophone West African countries are part of monetary unions (BEAC, BCEAO) that use currencies which are pegged to the Euro. Exchange rate fluctuations between Euro and US Dollar may have significant impact on project costs, making non-European Union financed projects more or less attractive for donor organizations. Project costs may hence vary depending on where the project is run and from which sources Bti and other material are obtained. A further limitation to this study is the application of a 50 % treatment threshold for larviciding. In the present study, this threshold was deliberately set to gather data on the achievable reduction with only the most productive half of water bodies treated. From an epidemiological point of view, it would be rather advisable to not work with an a priori set threshold of treated water bodies but an absolute threshold of larval densities, which if exceeded, indicates the need for treatment. For many settings it could turn out that larval productivity is still high although the breeding sites belong to the half with the lower larval densities.
Several assumptions based on field experience were introduced to calculate needed programme resources. The number of required spray personnel was set a priori to one person per village based on the observations of a low number of vector breeding sites in most of the villages. Despite the technically sufficient workforce it may be generally an advantage to employ sprayers as teams of two or more to increase motivation and backup security in the case of illness or absence. An increase in personnel would not significantly increase cost for wages on an hourly basis but it would double the need for spraying equipment.
The authors are aware that the introduction of our Bti cost-model comes with a considerable degree of generalization. While this feature makes the model easily applicable for other settings, at the same time, it comes at cost of context-dependent prediction accuracy. Both goals are not achievable without accepting certain trade-offs. Thus, it is worth mentioning that our cost-model outcomes only give a proxy for per capita programme costs and are expected to deliver more realistic results for settings that resemble the study region it was developed in. Nonetheless, the authors are confident that this cost-model not only sheds light into the cost structure of LSM programmes but that it will serve as a helpful implementation tool for larviciding programmes elsewhere by providing reliable cost estimates on technical, infrastructural and personnel needs.
Larvicide-based LSM is an additional, complementary tool for malaria control programmes that so far did not receive the attention it deserves for designing national and international policies. Particularly, in combination with LLINs and indoor residual spraying it proved to be a highly effective malaria vector control measure. For selected environments the use of remote sensing derived risk maps might be a promising approach to reduce the number of treated water bodies while, at the same time, keeping programme costs at reasonably low levels. Although today's WHO recommendations promote the use of LSM mainly for urban areas with high population densities with the underlying idea of obtaining reduced costs per person, rural areas should not be considered a priori as ineligible for spraying interventions. Given the continuously adapting nature of malaria vector mosquitoes to insecticides, we make a case to shift more attention to hereof unaffected control strategies such as Bti based LSM. The latter might work as an important complementary tool to achieve the ambitious goals pursued by the WHO's global technical strategy for malaria between 2016 and 2030, to reduce malaria incidence and mortality by at least 90 % .
PD, RS and NB developed the concept and design of the study. IT, PD, AK and AS supervised the collection of the data. PD, HCS, MS and IT and performed the analysis and interpretation of the cost data. PD and MS wrote the paper. All authors contributed to writing of the paper and the interpretation of the data. All authors read and approved the final manuscript.
We are deeply grateful to the research unit at the CRSN (Centre de Recherche en Santé de Nouna) for their valuable work and to the people in the study villages for their cooperation, interest and personal commitment in the underlying EMIRA study. We thank the Manfred Lautenschläger foundation for funding this research project. We would especially thank Peter De Chant for his valuable input and contribution with his knowledge. We acknowledge financial support by Deutsche Forschungsgemeinschaft and Ruprecht-Karls-Universität Heidelberg within the funding programme Open Access Publishing for publishing this article.
The authors declare that they have no competing interests.
Availability of data and material
The datasets supporting the conclusions of this article are available at the Health Research Centre in Nouna, Burkina Faso and will be made easily available on request, when required.
Consent for publication
There are no case presentations that require disclosure of respondents’ confidential data/information in this study.
Ethics approval and consent to participate
The study was approved by the ethics committees of the University of Heidelberg under the certificate number S-438/2013 and additionally presented to and granted by the national ethics board of Burkina Faso in Ouagadougou and the local ethics committee at the research site in Nouna. We collected aggregated collective informed consent for the spraying activities for each village. The population was gathered by the local village chiefs and the project, its goals and involved activities were explained in local language. Afterwards public discussions were held with the opportunity to ask questions or express concern. Community sensitization and information were performed during the two intervention years and additionally via the local radio station.
The EMIRA research project was financed by the charitable Manfred Lautenschläger foundation, Wiesloch, Germany.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
- WHO. World Malaria Report 2015. Geneva: World Health Organization; 2015. http://www.who.int/malaria/publications/world-malaria-report-2015/report/en/ Accessed 11 Apr 2016.
- Greenwood BM. Control to elimination: implications for malaria research. Trends Parasitol. 2008;24:449–54.View ArticlePubMedGoogle Scholar
- WHO. World Malaria Report 2013. Geneva: World Health Organization; 2014. http://www.who.int/malaria/publications/world_malaria_report_2013/en/ Accessed 23 July 2014.
- Nájera JA, González-Silva M, Alonso PL. Some lessons for the future from the Global Malaria Eradication Programme (1955–1969). PLoS Med. 2011;8:e1000412.View ArticlePubMedPubMed CentralGoogle Scholar
- Balkew M, Ibrahim M, Koekemoer LL, Brooke BD, Engers H, Aseffa A, et al. Insecticide resistance in Anopheles arabiensis (Diptera: Culicidae) from villages in central, northern and south west Ethiopia and detection of kdr mutation. Parasit Vectors. 2010;3:40.View ArticlePubMedPubMed CentralGoogle Scholar
- Cui F, Raymond M, Qiao CL. Insecticide resistance in vector mosquitoes in China. Pest Manag Sci. 2006;62:1013–22.View ArticlePubMedGoogle Scholar
- Coetzee M, van Wyk P, Booman M, Koekemoer LL, Hunt RH. Insecticide resistance in malaria vector mosquitoes in a gold mining town in Ghana and implications for malaria control. Bull Soc Pathol Exot. 2006;99:400–3.PubMedGoogle Scholar
- Briët OJ, Penny MA, Hardy D, Awolola TS, Van Bortel W, Corbel V, et al. Effects of pyrethroid resistance on the cost effectiveness of a mass distribution of long-lasting insecticidal nets: a modelling study. Malar J. 2013;12:77.View ArticlePubMedPubMed CentralGoogle Scholar
- Russell TL, Govella NJ, Azizi S, Drakeley CJ, Kachur SP, Killeen GF. Increased proportions of outdoor feeding among residual malaria vector populations following increased use of insecticide-treated nets in rural Tanzania. Malar J. 2011;10:80.View ArticlePubMedPubMed CentralGoogle Scholar
- Das PK, Amalraj DD. Biological control of malaria vectors. Indian J Med Res. 1997;106:174–97.PubMedGoogle Scholar
- Becker N, Margalit Y. Use of Bacillus thuringiensis israelensis against mosquitoes and blackflies. In: Entwistle PF, editor. Bacillus thuringiensis. Sussex: John Wiley & Sons Ltd.; 1993. p. 145–70.Google Scholar
- Becker N, Petric D, Zgomba M, Boase C, Madon M, Dahl C, et al. Mosquitoes and their control. Heidelberg: Springer; 2010.View ArticleGoogle Scholar
- Becker N. Microbial control of mosquitoes: management of the Upper Rhine mosquito population as a model programme. Parasitol Today. 1997;13:485–7.View ArticlePubMedGoogle Scholar
- Becker N. Bacterial control of vector-mosquitoes and black flies. In: Charles JF, Delecluse A, Nielsen-le-Roux C, editors. Entomopathogenic bacteria: from laboratory to field applications. Chap. 6.3. Berlin: Springer; 2000. p. 383–98. http://0-link.springer.com.brum.beds.ac.uk/chapter/10.1007/978-94-017-1429-7_21.
- Tusting LS, Thwing J, Sinclair D, Fillinger U, Gimnig J, Bonner KE, et al. Mosquito larval source management for controlling malaria. Cochrane Database Syst Rev. 2013;8:CD008923.PubMedPubMed CentralGoogle Scholar
- Kroeger A, Horstick O, Riedl C, Kaiser A, Becker N. The potential for malaria control with the biological larvicide Bacillus thuringiensis israelensis (Bti) in Peru and Ecuador. Acta Trop. 1995;60:47–57.View ArticlePubMedGoogle Scholar
- Dambach P, Louis VR, Kaiser A, Ouedraogo S, Sié A, Sauerborn R, et al. Efficacy of Bacillus thuringiensis var. israelensis against malaria mosquitoes in Northwestern Burkina Faso. Parasit Vectors. 2014;7:371.View ArticlePubMedPubMed CentralGoogle Scholar
- Fillinger U, Knols BGJ, Becker N. Efficacy and efficiency of new Bacillus thuringiensis var. israelensis and Bacillus sphaericus formulations against Afrotropical anophelines in Western Kenya. Trop Med Int Health. 2003;8:37–47.View ArticlePubMedGoogle Scholar
- Su T, Mulla MS. Field evaluation of new water-dispersible granular formulations of Bacillus thuringiensis ssp. israelensis and Bacillus sphaericus against Culex mosquitoes in microcosms. J Am Mosq Control Assoc. 1999;15:356–65.PubMedGoogle Scholar
- Majambere S, Pinder M, Fillinger U, Ameh D, Conway DJ, Green C, et al. Is Mosquito larval source management appropriate for reducing malaria in areas of extensive flooding in The Gambia? A cross-over intervention trial. Am J Trop Med Hyg. 2010;82:176–84.View ArticlePubMedPubMed CentralGoogle Scholar
- Nartey R, Owusu-Dabo E, Kruppa T, Baffour-Awuah S, Annan A, Oppong S, et al. Use of Bacillus thuringiensis var israelensis as a viable option in an Integrated Malaria Vector Control Programme in the Kumasi Metropolis, Ghana. Parasit Vectors. 2013;6:116.View ArticlePubMedPubMed CentralGoogle Scholar
- Fillinger U, Ndenga B, Githeko A, Lindsay SW. Integrated malaria vector control with microbial larvicides and insecticide-treated nets in western Kenya: a controlled trial. Bull World Health Organ. 2009;87:655–65.View ArticlePubMedPubMed CentralGoogle Scholar
- Fillinger U, Lindsay SW. Suppression of exposure to malaria vectors by an order of magnitude using microbial larvicides in rural Kenya. Trop Med Int Health. 2006;11:1629–42.View ArticlePubMedGoogle Scholar
- Geissbühler Y, Kannady K, Chaki PP, Emidi B, Govella NJ, Mayagaya V, et al. Microbial larvicide application by a large-scale, community-based program reduces malaria infection prevalence in urban Dar Es Salaam. Tanzania. PLoS One. 2009;4:e5107.View ArticlePubMedGoogle Scholar
- Nyarango PM, Gebremeskel T, Mebrahtu G, Mufunda J, Abdulmumini U, Ogbamariam A, et al. A steep decline of malaria morbidity and mortality trends in Eritrea between 2000 and 2004: the effect of combination of control methods. Malar J. 2006;5:33.View ArticlePubMedPubMed CentralGoogle Scholar
- WHO. Larval Source Management—a supplementary measure for malaria vector control. Geneva: World Health Organization; 2013.Google Scholar
- Sie A, Louis VR, Gbangou A, Muller O, Niamba L, Stieglbauer G, et al. The Health and Demographic Surveillance System (HDSS) in Nouna, Burkina Faso, 1993–2007. Glob Health Action. 2010;. doi:10.3402/gha.v3i0.5284.PubMedPubMed CentralGoogle Scholar
- Traore C. Epidemiology of malaria in a holoendemic area in rural Burkina Faso, Inaugural dissertation to obtain the degree of Dr. med. Heidelberg: Institut for Public Health, Medical Faculty of the University of Heidelberg; 2003.Google Scholar
- Hay SI, Rogers DJ, Toomer JF, Snow RW. Annual Plasmodium falciparum entomological inoculation rates (EIR) across Africa: literature survey, internet access and review. Trans R Soc Trop Med Hyg. 2000;94:113–27.View ArticlePubMedPubMed CentralGoogle Scholar
- Louis VR, Schoeps A, Tiendrebéogo J, Beiersmann C, Yé M, Damiba MR, et al. An insecticide-treated bed-net campaign and childhood malaria in Burkina Faso. Bull World Health Organ. 2015;93:750–8.View ArticlePubMedPubMed CentralGoogle Scholar
- Dambach P, Traoré I, Becker N, Kaiser A, Sié A, Sauerborn R. EMIRA: ecologic malaria reduction for Africa—innovative tools for integrated malaria control. Glob Health Action. 2014;7:25908.PubMedGoogle Scholar
- Dambach P, Machault V, Lacaux JP, Vignolles C, Sie A, Sauerborn R. Utilization of combined remote sensing techniques to detect environmental variables influencing malaria vector densities in rural West Africa. Int J Health Geogr. 2012;11:8–20.View ArticlePubMedPubMed CentralGoogle Scholar
- Machault V, Vignolles C, Pages F, Gadiaga L, Tourre YM, Gaye A, et al. Risk Mapping of Anopheles gambiae s.l. densities using remotely-sensed environmental and meteorological data in an urban Area: Dakar, Senegal. PLoS One. 2012;7:e50674.View ArticlePubMedPubMed CentralGoogle Scholar
- Ibrahim B, Polcher J, Karambiri H, Rockel B. Characterization of the rainy season in Burkina Faso and it’s representation by regional climate models. Clim Dyn. 2012;39:1287–302.View ArticleGoogle Scholar
- Samuelsen H, Toe LP, Baldet T, Skovmand O. Prevention of mosquito nuisance among urban populations in Burkina Faso. Soc Sci Med. 2004;59:2361–71.View ArticlePubMedGoogle Scholar
- Worrall E, Fillinger U. Large-scale use of mosquito larval source management for malaria control in Africa: a cost analysis. Malar J. 2011;10:338.View ArticlePubMedPubMed CentralGoogle Scholar
- von Hirsch H, Becker N. Cost-benefit analysis of mosquito control operations based on microbial control agents in the upper Rhine valley (Germany). Eur Mosq Bull. 2009;27:47–55.Google Scholar
- Worrall E, Connor SJ, Thomson MC. Improving the cost-effectiveness of IRS with climate informed health surveillance systems. Malar J. 2008;7:263.View ArticlePubMedPubMed CentralGoogle Scholar
- Yukich JO, Lengeler C, Tediosi F, Brown N, Mulligan J-A, Chavasse D, et al. Costs and consequences of large-scale vector control for malaria. Malar J. 2008;7:258.View ArticlePubMedPubMed CentralGoogle Scholar
- White MT, Conteh L, Cibulskis R, Ghani AC. Costs and cost-effectiveness of malaria control interventions-a systematic review. Malar J. 2011;10:337.View ArticlePubMedPubMed CentralGoogle Scholar
- Ministère de la Santé de Burkina Faso. Comptes Nationaux de la Santé—Comptes globaux et sous comptes Paludisme, Tuberculose et VIH/Sida. 2010.Google Scholar
- Becker N. Influence of climate change on mosquito development and mosquito-borne diseases in Europe. Parasitol Res. 2008;103:19–28.View ArticleGoogle Scholar
- Majambere S, Lindsay SW, Green C, Kandeh B, Fillinger U. Microbial larvicides for malaria control in The Gambia. Malar J. 2007;6:76.View ArticlePubMedPubMed CentralGoogle Scholar
- Fillinger U, Sombroek H, Majambere S, van Loon E, Takken W, Lindsay SW. Identifying the most productive breeding sites for malaria mosquitoes in The Gambia. Malar J. 2009;8:62.View ArticlePubMedPubMed CentralGoogle Scholar
- Fillinger U, Sonye G, Killeen GF, Knols BG, Becker N. The practical importance of permanent and semipermanent habitats for controlling aquatic stages of Anopheles gambiae sensu lato mosquitoes: operational observations from a rural town in western Kenya. Trop Med Int Health. 2004;9:1274–89.View ArticlePubMedGoogle Scholar
- Shililu J, Ghebremeskel T, Seulu F, Mengistu S, Fekadu H, Zerom M, et al. Larval habitat diversity and ecology of Anopheline larvae in Eritrea. J Med Entomol. 2003;40:921–9.View ArticlePubMedGoogle Scholar
- Munga S, Minakawa N, Zhou GF, Barrack OOJ, Githeko AK, Yan GY. Oviposition site preference and egg hatchability of Anopheles gambiae: effects of land cover types. J Med Entomol. 2005;42:993–7.PubMedGoogle Scholar
- Majambere S, Fillinger U, Sayer DR, Green C, Lindsay SW. Spatial distribution of mosquito larvae and the potential for targeted larval control in The Gambia. Am J Trop Med Hyg. 2008;79:19–27.PubMedGoogle Scholar
- Sattler MA, Mtasiwa D, Kiama M, Premji Z, Tanner M, Killeen GF, et al. Habitat characterization and spatial distribution of Anopheles sp. mosquito larvae in Dar es Salaam (Tanzania) during an extended dry period. Malar J. 2005;4:1.View ArticleGoogle Scholar
- Tun-Lin W, Lenhart A, Nam VS, Rebollar-Téllez E, Morrison AC, Barbazan P, et al. Reducing costs and operational constraints of dengue vector control by targeting productive breeding places: a multi-country non-inferiority cluster randomized trial. Trop Med Int Health. 2009;14:1143–53.View ArticlePubMedGoogle Scholar
- Amenyo JT, Phelps D, Oladipo O, Sewovoe-Ekuoe F, Jadoonanan S, Jadoonanan S, et al. MedizDroids project: ultra-low cost, low-altitude, affordable and sustainable UAV multicopter drones for mosquito vector control in malaria disease management. Seattle: IEEE Global Humanitarian Technology Conference. 2014. p. 590–6.Google Scholar